


| 货号 | 包装规格 | 操作 |
|---|---|---|
| 70009-U | 1 each |
BIOshell ™ A120 OLIGO C18是一种基于Fused-Core ®颗粒设计的高效液相色谱柱,能够实现高通量应用。由于0.5 µm深的多孔壳中的浅扩散路径和2.7 µm的小总粒径,这种颗粒设计具有非常高的柱效率。BIOshell ™ A120 OLIGO C18具有表面改性,可导致碱性BIOshell ™ A120 OLIGO C18采用INERTProve表面钝化色谱柱硬件,可消除非特异性吸附。
The BIOshell™ A120 OLIGO C18 bonded phase is a dimethyloctadecylsilane that has been specifically designed for applications requiring mobile phases that are mixtures of methanol and water or acetonitrile and water with mobile phase buffers or additives such as HFIP/TEA and TEAA. Using elevated temperatures (e.g., 40 – 60 ºC) will reduce the viscosityof the mobile phase and allow the use of faster flow rates and lower column pressure for high sample throughput. Gradient elution may start at 5% organic and then increase to a higher organic concentration depending on the length and sequence of the oligomers being analyzed. BIOshell™A120 OLIGO C18 columns are highly suited for ion pair reversed-phase separationof oligonucleotides up to 60 bases. Additional information on solvent selection and separation techniques can be found in Chapter 13, Practical HPLC MethodDevelopment, Second Edition, L.R. Snyder, J.L. Glajch, and J.J. Kirkland, (JohnWiley & Sons, 1997). The use of MS detectors may require additional considerations for ionization efficiencies and ionization suppression for choices of mobile phase additives. For more information, see Mobile Phase Aging and Its Impact on Electrospray Ionization of Oligonucleotides in J. Am. Soc. MassSpectrom. 2023, 34, 12, 2691–2699. (https://doi.org/10.1021/jasms.3c00264).
120 μ m孔径,可分离长度达60个碱基的低聚物高pH和温度稳定性,专为适合寡核苷酸分离的条件而设计UHPLC和质谱兼容固定相INERT证明表面钝化柱硬件,以减少不锈钢样品吸附的可能性
为最大限度延长色谱柱寿命,应确保样品和移动的相无微粒。强烈建议使用保护色谱柱或在进样器和色谱柱之间使用孔隙度为0.5 µm的在线过滤器。如果色谱柱的操作压力突然增加到超过正常水平,可尝试反转色谱柱的流动方向,以清除入口玻璃料上的碎屑。长期储存硅基,反相色谱柱最好在100%乙腈中使用。色谱柱可以安全地短期储存然而,当使用缓冲液时,最好保护色谱柱和HPLC设备,并通过用不含缓冲液的相同移动的相冲洗色谱柱来除去盐(例如,当使用60/40 MeCN/缓冲液时,用60/40 MeCN/H2O冲洗柱)以消除来自盐腐蚀的任何危险,同时提供柱与原始移动的相的快速再平衡。端部配件应与柱附带的端塞紧密密封,以防止填料干燥。
新色谱柱含有水和乙腈的混合物。最初应注意避免与该溶剂不混溶或可能导致沉淀的移动的相。水和所有常见的有机溶剂与BIOshell ™ A120 OLIGO C18色谱柱相容。BIOshell ™ A120 OLIGO C18色谱柱在65 °C下的额定pH值为11,如果色谱柱在最高温度和最高pH值下连续运行,色谱柱寿命可能会缩短。BIOshell ™ A120 OLIGO C18色谱柱在高达600 bar(9000 psi)的操作压力下保持稳定。
| 英文名称 | BIOshell™ A120 Oligo C18 (2.7 µm) INERTProve HPLC Column |
| NACRES | NA.21 |
| 机构 | 适用于USP L1 |
| 质量等级 | 100 |
| 分子量 | 2000 - 10,000 |
| 特征 | 封端 |
| 包装 | 每个 1 件包装 |
| 标签范围 | 5.6%碳负载 |
| 参数 | 65 °C温度限值(pH 11); 85 °C温度限值(pH 9); 90 °C温度限值(pH 2) |
| L × I.D. | 5 cm × 4.6 mm |
| 表面积 | 75 m2/g |
| 矩阵 | 表面多孔颗粒 平台颗粒 |
| 基体 活性基团 | 二甲基十八烷基硅烷,表面改性相 |
| 颗粒大小 | 2.7 μm |
| 孔径 | 120 Å 孔径 |
| 操作 pH 范围 | 2-11 |
| 包装规格(货号 70009-U) | 1 each |